Tuesday, December 20, 2016

Silhouette Christmas Ornaments

Shrinky Dink silhouette Christmas ornaments craft

While the children will be making various handprint and crafty items this week before Christmas, I wanted to do something for the parents that would be a lasting memento. 

Silhouettes are back in fashion, and I thought that would be a great idea to start with.

For the process:

I already had a pack of Shrinky Dink film. 



I took profile pics of the kiddos.

Knowing that my film is 8 1/2 X 11 inches, I manipulated the pics in my word processing drawing feature to comfortably fit within a 1/4 page space with enough extra for the hole at the top and the frame at the bottom.



I printed out the pics, placed them under the Shrinky Dink film, and outlined with a black Sharpie marker. [Don't scrimp and use a low-end marker.] I then removed the film from atop the photo on to a piece of plain white paper.

I took an oval piece from one of the children's shape matching games and used it as a template at the bottom to make a frame for their name and the year. I free handed the inside line about 1/4 inch.

I wrote their name and the year into the frame. I liked the satin look for the front of the ornament. If you want the shiny look for the front, I would print out the name and year in mirror and copy onto the ornament. 



I colored in the profile outline and the frame with a broad tip permanent marker going in one direction. If you go back and forth then it will start pulling the ink and make a gummy mess. Make a clean, slightly overlapping line and leave it to dry.

Once the first layer is dry, do a second layer of black permanent marker in the opposite direction. It will give a linen-like look to the finished piece. 

If necessary, let dry and do a third coat. Just because it shrinks down dramatically, doesn't mean that any missed or thin ink spots won't show. Get a good coverage before shrinking.

Use a standard hole punch to punch a string/hanger hole at the top of the film.

Bake at 325 degrees. I won't give a time, just to say it takes a couple of minutes. You need to watch them carefully and once they are FULLY flat, count 30 seconds and remove to cool. I was fearful the entire time watching them as they curl and bubble up and look like a freakish mess and that there is no way possible that they could end up flat and looking decent. They do! Just let them do their thing.

Once thoroughly cooled, I sprayed the inked side with a satin enamel. You could also use Modge Podge or another sealer, but I wanted something I could spray so that it wouldn't possibly mess up the pic with brushing something on.





I had some cording that fit perfectly through the hole. 


shrinky dink silhouette Christmas ornaments

They turn out relatively small. The shrinkage rate on my Shrinky Dink paper is suppose to be 50%, but they seem really small for a 1/4 sheet. They went from 4 1/4 X 5 1/2 to 1 5/8 X 2 inches.

I really like them. I hope the parents do, too.

cd3b5a1cfca0f056eb22a99c7b76c7bf2fd26004c317632a6f

1 comment:

  1. It looks really good, you did pretty good job. Like your creativity, will try it by myself. Hope that I will be doing good as well. Thanks for sharing it with us

    ReplyDelete

Note: Only a member of this blog may post a comment.